استاندارد آزمایش ذرات مغناطیسی برای شکل دهی میل لنگ های بزرگ  ASTM A456

2 خریدها
#
instock
تومان

توضیحات

استاندارد ASTM A456 برای آزمایش ذرات مغناطیسی میل لنگ ها مورد استفاده قرار میگیرد. در زیر کلیات موارد استفاده  ASTM A456  ذکر شده است.

Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

این  آزمایش غیر مخرب  است که برای پیدا کردن عیوب بکار میرود.

اهداف:

این مشخصات برای میل لنگ های با قطر پین تکیه گاهی بزرگتر از ۴ اینچ مفید است.

برای پذیرش این مشخصات سه کلاس مختلف تعریف شده است.

نکته : استاندارد ASTM A668 برای شکل دهی میل لنگ ها مورد استفاده قرار میگیرد.

 

در آزمایش ذرات مغناطیسی علائم ظاهر شده روی میل لننگ ها بصورت زیر هستند:

ترک های باز ( open cracks  ) ، پوسته پوسته شدن ( Flake ) ، یا لوله شدن.

خوردگی های غیر فلزی در جهت طولی

و ….

سایر طبقه بندی ها در زیر آمده است:

 

۳٫ Classification of Indications
۳٫۱ Magnetic particle indications on the surface of the
crankshaft shall be classified as follows:
۳٫۱٫۱ Open cracks, flake, or pipe.
۳٫۱٫۲ Nonmetallic inclusions or stringers occurring in a
longitudinal direction.
۳٫۱٫۳ Twist cracks or nonmetallic inclusions usually occurring
at 45 to 70° from the axis of the journal.
۳٫۲ They shall also be classified as follows:
۳٫۲٫۱ Open indications are visible after removal of the
magnetic particles or can be detected by the use of contrast dye
penetrant, as described in Type II of Practice E 1417.
۳٫۲٫۱٫۱ Pinpoint indications are open indications 1⁄۱۶ in.
[۱٫۵ mm] in maximum dimension, as detected by application of
Type II of Practice E 1417.
۳٫۲٫۲ Non-open indications are indications which are not
visually detectable as described in 3.2.1.

مراجع مورد استفاده در این استاندارد بصورت زیر است:

ASTM Standards:
A 275/A 275M Test Method for Magnetic Particle Examination of Steel Forgings
A 668/A 668M Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A 966/A 966M Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current

دیدگاهها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین نفری باشید که دیدگاهی را ارسال می کنید برای “استاندارد آزمایش ذرات مغناطیسی برای شکل دهی میل لنگ های بزرگ  ASTM A456”

کلمات کلیدی

بالا