استاندارد میله ها و ورق های فولادی نورد شده ASTM A6

0 خریدها
#
instock
تومان

توضیحات

به این فایل امتیاز دهید

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

استاندارد مشخصات لازم برای میله ها ، صفحه ها و شکل های فولادی نورد شده

۱٫۲ Annex A1 lists permitted variations in dimensions and
mass (Note 1) in SI units. The values listed are not exact
conversions of the values in Tables 1 to 31 inclusive but are,
instead, rounded or rationalized values. Conformance to Annex
A1 is mandatory when the “M” specification designation is
used.
NOTE 1—The term “weight” is used when inch-pound units are the
standard; however, under SI, the preferred term is “mass.”
۱٫۳ Annex A2 lists the dimensions of some shape profiles.
۱٫۴ Appendix X1 provides information on coil as a source
of structural products.
۱٫۵ Appendix X2 provides information on the variability of
tensile properties in plates and structural shapes.
۱٫۶ Appendix X3 provides information on weldability.
۱٫۷ Appendix X4 provides information on cold bending of
plates, including suggested minimum inside radii for cold
bending.
۱٫۸ This general requirements specification also covers a
group of supplementary requirements that are applicable to
several of the above product specifications as indicated therein.
Such requirements are provided for use where additional
testing or additional restrictions are required by the purchaser,
and apply only where specified individually in the purchase
order.

مراجع مورد استفاده در این استاندارد به شرح زیر است:

Referenced Documents

A131/A131M Specification for Structural Steel for Ships
A370 Test Methods and Definitions for Mechanical Testing
of Steel Products
A673/A673M Specification for Sampling Procedure for Impact
Testing of Structural Steel
A700 Guide for Packaging, Marking, and Loading Methods
for Steel Products for Shipment
A751 Test Methods, Practices, and Terminology for Chemical
Analysis of Steel Products
A829/A829M Specification for Alloy Structural Steel Plates
A941 Terminology Relating to Steel, Stainless Steel, Related
Alloys, and Ferroalloys
E29 Practice for Using Significant Digits in Test Data to
Determine Conformance with Specifications
E112 Test Methods for Determining Average Grain Size
E208 Test Method for Conducting Drop-Weight Test to
Determine Nil-Ductility Transition Temperature of Ferritic
Steels

A5.1/A5.1M Mild Steel Covered Arc-Welding Electrodes
A5.5/A5.5M Low-Alloy Steel Covered Arc-Welding Electrodes
A5.17/A5.17M Specification For Carbon Steel Electrodes
And Fluxes For Submerged Arc Welding
A5.18/A5.18M Specification For Carbon Steel Electrodes
And Rods For Gas Shielded Arc Welding
A5.20/A5.20M Carbon Steel Electrodes For Flux Cored Arc
Welding
A5.23/A5.23M Low Alloy Steel Electrodes And Fluxes For
Submerged Arc Welding
A5.28/A5.28M Specification For Low-Alloy Steel Electrodes
And Rods For Gas Shielded Arc Welding
A5.29/A5.29M Specification for Low-Alloy Steel Electrodes
for Flux Cored Arc Welding
D1.1/D1.1M Structural Welding Code Steel
۲٫۳ U.S. Military Standards:5
MIL-STD-129 Marking for Shipment and Storage
MIL-STD-163 Steel Mill Products Preparation for Shipment
and Storage
۲٫۴ U.S. Federal Standard:5
Fed. Std. No. 123 Marking for Shipments (Civil Agencies)
۲٫۵ American Society of Mechanical Engineers Code:6
ASME Boiler and Pressure Vessel Code, Section IX

دیدگاهها

هیچ دیدگاهی برای این محصول نوشته نشده است.

اولین نفری باشید که دیدگاهی را ارسال می کنید برای “استاندارد میله ها و ورق های فولادی نورد شده ASTM A6”

کلمات کلیدی

بالا